365 lines
9.1 KiB
C
365 lines
9.1 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#include <string.h>
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "test.h"
|
|
#include "chprintf.h"
|
|
#include "evtimer.h"
|
|
#include "buzzer.h"
|
|
|
|
#include "ff.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Card insertion monitor. */
|
|
/*===========================================================================*/
|
|
|
|
#define POLLING_INTERVAL 10
|
|
#define POLLING_DELAY 10
|
|
|
|
/**
|
|
* @brief Card monitor timer.
|
|
*/
|
|
static VirtualTimer tmr;
|
|
|
|
/**
|
|
* @brief Debounce counter.
|
|
*/
|
|
static unsigned cnt;
|
|
|
|
/**
|
|
* @brief Card event sources.
|
|
*/
|
|
static EventSource inserted_event, removed_event;
|
|
|
|
/**
|
|
* @brief Insertion monitor timer callback function.
|
|
*
|
|
* @param[in] p pointer to the @p BaseBlockDevice object
|
|
*
|
|
* @notapi
|
|
*/
|
|
static void tmrfunc(void *p) {
|
|
BaseBlockDevice *bbdp = p;
|
|
|
|
/* The presence check is performed only while the driver is not in a
|
|
transfer state because it is often performed by changing the mode of
|
|
the pin connected to the CS/D3 contact of the card, this could disturb
|
|
the transfer.*/
|
|
blkstate_t state = blkGetDriverState(bbdp);
|
|
chSysLockFromIsr();
|
|
if ((state != BLK_READING) && (state != BLK_WRITING)) {
|
|
/* Safe to perform the check.*/
|
|
if (cnt > 0) {
|
|
if (blkIsInserted(bbdp)) {
|
|
if (--cnt == 0) {
|
|
chEvtBroadcastI(&inserted_event);
|
|
}
|
|
}
|
|
else
|
|
cnt = POLLING_INTERVAL;
|
|
}
|
|
else {
|
|
if (!blkIsInserted(bbdp)) {
|
|
cnt = POLLING_INTERVAL;
|
|
chEvtBroadcastI(&removed_event);
|
|
}
|
|
}
|
|
}
|
|
chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp);
|
|
chSysUnlockFromIsr();
|
|
}
|
|
|
|
/**
|
|
* @brief Polling monitor start.
|
|
*
|
|
* @param[in] p pointer to an object implementing @p BaseBlockDevice
|
|
*
|
|
* @notapi
|
|
*/
|
|
static void tmr_init(void *p) {
|
|
|
|
chEvtInit(&inserted_event);
|
|
chEvtInit(&removed_event);
|
|
chSysLock();
|
|
cnt = POLLING_INTERVAL;
|
|
chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p);
|
|
chSysUnlock();
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* FatFs related. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief FS object.
|
|
*/
|
|
FATFS MMC_FS;
|
|
|
|
/**
|
|
* MMC driver instance.
|
|
*/
|
|
MMCDriver MMCD1;
|
|
|
|
/* FS mounted and ready.*/
|
|
static bool_t fs_ready = FALSE;
|
|
|
|
/* Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0).*/
|
|
static SPIConfig hs_spicfg = {
|
|
NULL,
|
|
IOPORT1,
|
|
PA_SSEL1,
|
|
CR0_DSS8BIT | CR0_FRFSPI | CR0_CLOCKRATE(0),
|
|
2
|
|
};
|
|
|
|
/* Low speed SPI configuration (281.250kHz, CPHA=0, CPOL=0).*/
|
|
static SPIConfig ls_spicfg = {
|
|
NULL,
|
|
IOPORT1,
|
|
PA_SSEL1,
|
|
CR0_DSS8BIT | CR0_FRFSPI | CR0_CLOCKRATE(0),
|
|
254
|
|
};
|
|
|
|
/* MMC/SD over SPI driver configuration.*/
|
|
static MMCConfig mmccfg = {&SPID1, &ls_spicfg, &hs_spicfg};
|
|
|
|
/* Generic large buffer.*/
|
|
uint8_t fbuff[1024];
|
|
|
|
static FRESULT scan_files(BaseSequentialStream *chp, char *path) {
|
|
FRESULT res;
|
|
FILINFO fno;
|
|
DIR dir;
|
|
int i;
|
|
char *fn;
|
|
|
|
#if _USE_LFN
|
|
fno.lfname = 0;
|
|
fno.lfsize = 0;
|
|
#endif
|
|
res = f_opendir(&dir, path);
|
|
if (res == FR_OK) {
|
|
i = strlen(path);
|
|
for (;;) {
|
|
res = f_readdir(&dir, &fno);
|
|
if (res != FR_OK || fno.fname[0] == 0)
|
|
break;
|
|
if (fno.fname[0] == '.')
|
|
continue;
|
|
fn = fno.fname;
|
|
if (fno.fattrib & AM_DIR) {
|
|
path[i++] = '/';
|
|
strcpy(&path[i], fn);
|
|
res = scan_files(chp, path);
|
|
if (res != FR_OK)
|
|
break;
|
|
path[--i] = 0;
|
|
}
|
|
else {
|
|
chprintf(chp, "%s/%s\r\n", path, fn);
|
|
}
|
|
}
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Main and generic code. */
|
|
/*===========================================================================*/
|
|
|
|
/*
|
|
* Red LEDs blinker thread, times are in milliseconds.
|
|
*/
|
|
static WORKING_AREA(waThread1, 128);
|
|
static msg_t Thread1(void *arg) {
|
|
|
|
(void)arg;
|
|
chRegSetThreadName("blinker1");
|
|
while (TRUE) {
|
|
palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED2));
|
|
chThdSleepMilliseconds(200);
|
|
palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
|
|
chThdSleepMilliseconds(800);
|
|
palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED1));
|
|
chThdSleepMilliseconds(200);
|
|
palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
|
|
chThdSleepMilliseconds(800);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Yellow LED blinker thread, times are in milliseconds.
|
|
*/
|
|
static WORKING_AREA(waThread2, 128);
|
|
static msg_t Thread2(void *arg) {
|
|
|
|
(void)arg;
|
|
chRegSetThreadName("blinker2");
|
|
while (TRUE) {
|
|
palClearPad(IOPORT1, PA_LEDUSB);
|
|
chThdSleepMilliseconds(200);
|
|
palSetPad(IOPORT1, PA_LEDUSB);
|
|
chThdSleepMilliseconds(300);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Executed as event handler at 500mS intervals.
|
|
*/
|
|
static void TimerHandler(eventid_t id) {
|
|
|
|
(void)id;
|
|
if (!palReadPad(IOPORT1, PA_BUTTON1)) {
|
|
if (fs_ready) {
|
|
FRESULT err;
|
|
uint32_t clusters;
|
|
FATFS *fsp;
|
|
|
|
err = f_getfree("/", &clusters, &fsp);
|
|
if (err != FR_OK) {
|
|
chprintf((BaseSequentialStream *)&SD1, "FS: f_getfree() failed\r\n");
|
|
return;
|
|
}
|
|
chprintf((BaseSequentialStream *)&SD1,
|
|
"FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
|
|
clusters, (uint32_t)MMC_FS.csize,
|
|
clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE);
|
|
fbuff[0] = 0;
|
|
scan_files((BaseSequentialStream *)&SD1, (char *)fbuff);
|
|
}
|
|
}
|
|
else if (!palReadPad(IOPORT1, PA_BUTTON2)) {
|
|
static WORKING_AREA(waTestThread, 256);
|
|
Thread *tp = chThdCreateStatic(waTestThread, sizeof(waTestThread),
|
|
NORMALPRIO, TestThread, &SD1);
|
|
chThdWait(tp);
|
|
buzzPlay(500, MS2ST(100));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* MMC card insertion event.
|
|
*/
|
|
static void InsertHandler(eventid_t id) {
|
|
FRESULT err;
|
|
|
|
(void)id;
|
|
buzzPlayWait(1000, MS2ST(100));
|
|
buzzPlayWait(2000, MS2ST(100));
|
|
chprintf((BaseSequentialStream *)&SD1, "MMC: inserted\r\n");
|
|
/*
|
|
* On insertion MMC initialization and FS mount.
|
|
*/
|
|
chprintf((BaseSequentialStream *)&SD1, "MMC: initialization ");
|
|
if (mmcConnect(&MMCD1)) {
|
|
chprintf((BaseSequentialStream *)&SD1, "failed\r\n");
|
|
return;
|
|
}
|
|
chprintf((BaseSequentialStream *)&SD1, "ok\r\n");
|
|
chprintf((BaseSequentialStream *)&SD1, "FS: mount ");
|
|
err = f_mount(0, &MMC_FS);
|
|
if (err != FR_OK) {
|
|
chprintf((BaseSequentialStream *)&SD1, "failed\r\n");
|
|
mmcDisconnect(&MMCD1);
|
|
return;
|
|
}
|
|
fs_ready = TRUE;
|
|
chprintf((BaseSequentialStream *)&SD1, "ok\r\n");
|
|
buzzPlay(440, MS2ST(200));
|
|
}
|
|
|
|
/*
|
|
* MMC card removal event.
|
|
*/
|
|
static void RemoveHandler(eventid_t id) {
|
|
|
|
(void)id;
|
|
chprintf((BaseSequentialStream *)&SD1, "MMC: removed\r\n");
|
|
mmcDisconnect(&MMCD1);
|
|
fs_ready = FALSE;
|
|
buzzPlayWait(2000, MS2ST(100));
|
|
buzzPlayWait(1000, MS2ST(100));
|
|
}
|
|
|
|
/*
|
|
* Application entry point.
|
|
*/
|
|
int main(void) {
|
|
static const evhandler_t evhndl[] = {
|
|
TimerHandler,
|
|
InsertHandler,
|
|
RemoveHandler
|
|
};
|
|
static EvTimer evt;
|
|
struct EventListener el0, el1, el2;
|
|
|
|
/*
|
|
* System initializations.
|
|
* - HAL initialization, this also initializes the configured device drivers
|
|
* and performs the board-specific initializations.
|
|
* - Kernel initialization, the main() function becomes a thread and the
|
|
* RTOS is active.
|
|
*/
|
|
halInit();
|
|
chSysInit();
|
|
|
|
/*
|
|
* Activates the serial driver 1 using the driver default configuration.
|
|
*/
|
|
sdStart(&SD1, NULL);
|
|
|
|
/*
|
|
* Buzzer driver initialization.
|
|
*/
|
|
buzzInit();
|
|
|
|
/*
|
|
* Initializes the MMC driver to work with SPI2.
|
|
*/
|
|
mmcObjectInit(&MMCD1);
|
|
mmcStart(&MMCD1, &mmccfg);
|
|
|
|
/*
|
|
* Activates the card insertion monitor.
|
|
*/
|
|
tmr_init(&MMCD1);
|
|
|
|
/*
|
|
* Creates the blinker threads.
|
|
*/
|
|
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
|
|
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
|
|
|
|
/*
|
|
* Normal main() thread activity, in this demo it does nothing except
|
|
* sleeping in a loop and listen for events.
|
|
*/
|
|
evtInit(&evt, MS2ST(500)); /* Initializes an event timer object. */
|
|
evtStart(&evt); /* Starts the event timer. */
|
|
chEvtRegister(&evt.et_es, &el0, 0); /* Registers on the timer event source. */
|
|
chEvtRegister(&inserted_event, &el1, 1);
|
|
chEvtRegister(&removed_event, &el2, 2);
|
|
while (TRUE)
|
|
chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
|
|
return 0;
|
|
}
|