HackRF-Treasure-Chest/Software/portapack-mayhem/hackrf/firmware/libopencm3/lib/lpc43xx/uart.c

244 lines
6.3 KiB
C
Raw Normal View History

2022-09-22 18:26:57 +02:00
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2012 Benjamin Vernoux <titanmkd@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/lpc43xx/uart.h>
#include <libopencm3/lpc43xx/cgu.h>
#define UART_SRC_32K 0x00
#define UART_SRC_IRC 0x01
#define UART_SRC_ENET_RX 0x02
#define UART_SRC_ENET_TX 0x03
#define UART_SRC_GP_CLKIN 0x04
#define UART_SRC_XTAL 0x06
#define UART_SRC_PLL0USB 0x07
#define UART_SRC_PLL0AUDIO 0x08
#define UART_SRC_PLL1 0x09
#define UART_SRC_IDIVA 0x0C
#define UART_SRC_IDIVB 0x0D
#define UART_SRC_IDIVC 0x0E
#define UART_SRC_IDIVD 0x0F
#define UART_SRC_IDIVE 0x10
#define UART_CGU_AUTOBLOCK_CLOCK_BIT 11
/* clock source selection (5 bits) */
#define UART_CGU_BASE_CLK_SEL_SHIFT 24
uint32_t dummy_read;
/*
* UART Init function
*/
void uart_init(uart_num_t uart_num, uart_databit_t data_nb_bits,
uart_stopbit_t data_nb_stop, uart_parity_t data_parity,
uint16_t uart_divisor, uint8_t uart_divaddval, uint8_t uart_mulval)
{
uint32_t lcr_config;
uint32_t uart_port;
uart_port = uart_num;
switch (uart_num) {
case UART0_NUM:
/* use PLL1 as clock source for UART0 */
CGU_BASE_UART0_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
break;
case UART1_NUM:
/* use PLL1 as clock source for UART1 */
CGU_BASE_UART1_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
break;
case UART2_NUM:
/* use PLL1 as clock source for UART2 */
CGU_BASE_UART2_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
break;
case UART3_NUM:
/* use PLL1 as clock source for UART3 */
CGU_BASE_UART3_CLK = (1<<UART_CGU_AUTOBLOCK_CLOCK_BIT) |
(CGU_SRC_PLL1<<UART_CGU_BASE_CLK_SEL_SHIFT);
break;
default:
return; /* error */
}
/* FIFOs RX/TX Enabled and Reset RX/TX FIFO (DMA Mode is also cleared)*/
UART_FCR(uart_port) = (UART_FCR_FIFO_EN | UART_FCR_RX_RS |
UART_FCR_TX_RS);
/* Disable FIFO */
UART_FCR(uart_port) = 0;
/* Dummy read (to clear existing data) */
while (UART_LSR(uart_port) & UART_LSR_RDR) {
dummy_read = UART_RBR(uart_port);
}
/* Wait end of TX & disable TX */
UART_TER(uart_port) = UART_TER_TXEN;
/* Wait for current transmit complete */
while (!(UART_LSR(uart_port) & UART_LSR_THRE));
/* Disable Tx */
UART_TER(uart_port) = 0;
/* Disable interrupt */
UART_IER(uart_port) = 0;
/* Set LCR to default state */
UART_LCR(uart_port) = 0;
/* Set ACR to default state */
UART_ACR(uart_port) = 0;
/* Dummy Read to Clear Status */
dummy_read = UART_LSR(uart_port);
/*
Table 835. USART Fractional Divider Register:
UARTbaudrate = PCLK / ( 16* (((256*DLM)+ DLL)*(1+(DivAddVal/MulVal))) )
The value of MULVAL and DIVADDVAL should comply to the following
conditions:
1. 1 <= MULVAL <= 15
2. 0 <= DIVADDVAL <= 14
3. DIVADDVAL < MULVAL
*/
/* Set DLAB Bit */
UART_LCR(uart_port) |= UART_LCR_DLAB_EN;
UART_DLM(uart_port) = UART_LOAD_DLM(uart_divisor);
UART_DLL(uart_port) = UART_LOAD_DLL(uart_divisor);
/* Clear DLAB Bit */
UART_LCR(uart_port) &= (~UART_LCR_DLAB_EN) & UART_LCR_BITMASK;
UART_FDR(uart_port) = UART_FDR_BITMASK &
(UART_FDR_MULVAL(uart_mulval) | UART_FDR_DIVADDVAL(uart_divaddval));
/* Read LCR config & Force Enable of Divisor Latches Access */
lcr_config = (UART_LCR(uart_port) & UART_LCR_DLAB_EN) &
UART_LCR_BITMASK;
lcr_config |= data_nb_bits; /* Set Nb Data Bits */
lcr_config |= data_nb_stop; /* Set Nb Stop Bits */
lcr_config |= data_parity; /* Set Data Parity */
/* Write LCR (only 8bits) */
UART_LCR(uart_port) = (lcr_config & UART_LCR_BITMASK);
/* Enable TX */
UART_TER(uart_port) = UART_TER_TXEN;
}
/*
* This Function return if data are received or not received.
*/
uart_rx_data_ready_t uart_rx_data_ready(uart_num_t uart_num)
{
uint32_t uart_port;
uint8_t uart_status;
uart_rx_data_ready_t data_ready;
uart_port = uart_num;
uart_status = UART_LSR(uart_port) & 0xFF;
/* Check Error */
if ((uart_status & UART_LSR_ERROR_MASK) == 0) {
/* No errors check if data is ready */
if ((uart_status & UART_LSR_RDR) == 0) {
data_ready = UART_RX_NO_DATA;
} else {
data_ready = UART_RX_DATA_READY;
}
} else {
/* UART Error */
data_ready = UART_RX_DATA_ERROR;
}
return data_ready;
}
/*
* This Function Wait until Data RX Ready, and return Data Read from UART.
*/
uint8_t uart_read(uart_num_t uart_num)
{
uint32_t uart_port;
uint8_t uart_val;
uart_port = uart_num;
/* Wait Until Data Received (Rx Data Not Ready) */
while ((UART_LSR(uart_port) & UART_LSR_RDR) == 0);
uart_val = (UART_RBR(uart_port) & UART_RBR_MASKBIT);
return uart_val;
}
/*
* This Function Wait until Data RX Ready, and return Data Read from UART.
*/
uint8_t uart_read_timeout(uart_num_t uart_num, uint32_t rx_timeout_nb_cycles,
uart_error_t *error)
{
uint32_t uart_port;
uint8_t uart_val;
uint32_t counter;
uart_port = uart_num;
/* Wait Until Data Received (Rx Data Not Ready) */
counter = 0;
while ((UART_LSR(uart_port) & UART_LSR_RDR) == 0) {
if (rx_timeout_nb_cycles > 0) {
counter++;
if (counter >= rx_timeout_nb_cycles) {
*error = UART_TIMEOUT_ERROR;
return 0;
}
}
}
uart_val = (UART_RBR(uart_port) & UART_RBR_MASKBIT);
/* Clear error */
*error = UART_NO_ERROR;
return uart_val;
}
/* This Function Wait Data TX Ready, and Write Data to UART
if rx_timeout_nb_cycles = 0 Infinite wait
*/
void uart_write(uart_num_t uart_num, uint8_t data)
{
uint32_t uart_port;
uart_port = uart_num;
/* Wait Until FIFO not full */
while ((UART_LSR(uart_port) & UART_LSR_THRE) == 0);
UART_THR(uart_port) = data;
}